search

Rongta Technology RP58 Manual de usuario

Busca en linea o descarga Manual de usuario para Impresión y escaneo Rongta Technology RP58. Cuations during installation and operation: Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
RONGTA TECHNOLOGY
1
www.rongtatech.com
RP-58 Ethernet Interface Setup Tool Manual
Check the printer IP address and Ethernet ID address
Check the IP address and Ethernet ID address in the power-on self-test page.
All the printer are produced with the same default IP address:192.168.1.87 and the
same default Ethernet ID address:168-1一87-18-52-86. Users need to change
addresses by“RP-58Tool(IP).exe”and makes sure all the printers have there unique IP
address and Ethernet ID address. Otherwise the printer can't connect to the network or
print properly.
Power-on self-test operation:1, connect the printer with power; 2 ,turn on the power
and press the "feed" button; 3,check the reset testing; 4, Release "feed " button within
5 seconds after finish reset testing, and the printer will print on the power-on self-test
page.
Cuations during installation and operation:
1.The uniqueness of Printer IP address: All the IP addresses of the printers connected
with the network must be unique that is the Printer IP addresses must be different
from the PC IP addresses. If the Printer has the same IP address as the PC, the printer
can't connect to the network or print properly. In that case, users need to change the
printer IP address through PrjRP-58.exe which is on the attached CD with the
printer （\\RP-58 Driver&Tool\ RP-58Tool(IP).exe）. We will introduce the operation
later.
2.The uniqueness of the printer Ethernet ID address:All the Ethernet ID addresses of
printers connected with the network must be unique that is the Printer Ethernet ID
addresses must be different from the PC Ethernet ID addresses.If the Printer has the
same Ethernet ID address as the PC, the printer can't connect to the network or print
properly. In that case, users need to change the printer Ethernet ID address through
PrjRP-58.exe which is on the attached CD with the printer （\\RP-58 Driver&Tool\
RP-58Tool(IP).exe）. We will introduce the operation later.
3.The default IP address of the printer is: 192.168.1.87. In order to connect the printer
with the PC successfully, users need to change the PC IP address so that the IP
addresses of PC and Printer are in the same network segment .For example, if the
printer IP address is: 192.168.1.87, users can set the PC IP address as 192.168.1.60 so
these two IP addresses are in the same network segment. See the following picture.
Vista de pagina 0
1 2 3 4 5 6 ... 10 11

Indice de contenidos

Pagina 1 - RONGTA TECHNOLOGY

RONGTA TECHNOLOGY 1 www.rongtatech.com RP-58 Ethernet Interface Setup Tool Manual Check the printer IP address and Ethernet ID address Chec

Pagina 2

RONGTA TECHNOLOGY 10 www.rongtatech.com See the above picture, under the IP port name, "Protocol" → "Raw"→ set &qu

Pagina 3

RONGTA TECHNOLOGY 11 www.rongtatech.com c.If the printers can print the windows power-on self-test properly, printer is connecte

Pagina 4

RONGTA TECHNOLOGY 2 www.rongtatech.com After set the PC IP address in the same network segment with the Printer IP address, users can check

Pagina 5

RONGTA TECHNOLOGY 3 www.rongtatech.com Click "OK", see the following picture. Input ping instruction to test the network connectio

Pagina 6

RONGTA TECHNOLOGY 4 www.rongtatech.com Otherwise you will see "Request timed out" error as the following picture.

Pagina 7

RONGTA TECHNOLOGY 5 www.rongtatech.com RP-58 Ethernet Interface Printer Setup Tool Instructor Note: it is suitable only for WinNT、Win2000、Win

Pagina 8

RONGTA TECHNOLOGY 6 www.rongtatech.com After finishing inputting new IP, select “set”，and then will show as below box: 5.Check the printer

Pagina 9

RONGTA TECHNOLOGY 7 www.rongtatech.com Note: usually the ID address will change as the user revise the IP address, so that every Ethernet pri

Pagina 10

RONGTA TECHNOLOGY 8 www.rongtatech.com Then click "Next>". See the following picture. Users need to choose "Custom"

Pagina 11

RONGTA TECHNOLOGY 9 www.rongtatech.com Then click "setting…", see the following picture.

Mas documentos para Impresión y escaneo Rongta Technology RP58

a Ver el documento Rongta Technology RP58 Manual de usuario
Rongta Technology RP58 Manual de usuario (15 paginas)
a Ver el documento Rongta Technology RP58 Manual de usuario
Rongta Technology RP58 Manual de usuario (14 paginas)

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Impresión y escaneo Rongta Technology RP58
Impresión y escaneo Rongta Technology RP58 Manual de usuario   (14 paginas)
  • Lathem Ultrative Deltech Fitness Varathane XEPA
  • Emerson Reproductores de cd Garmin Bandejas De Cables Polk Audio Instrumento musical amplificador Doro Teléfonos móviles JVC Reproductores de minidisc
  • Makita BO370 Samsung 320MXN-2 Altronix SMP7PMCTX Philips 226E9QDSB/00 Canon imageCLASS MF6500 Series
  • Aastra 9480i CT Manual de usuario LG J10HD Manual de usuario Sterling 72290106-0 Guía de instalación Samsung SC5255 Manual de usuario Cisco WUSB54GSC Manual de usuario